top of page

Deep Earthers

Public·12 members
Ion Zidarescu
Ion Zidarescu

Download Software Ht Motorola Gp 2000 Vhf


Download Software HT Motorola GP 2000 VHF




The Motorola GP 2000 VHF is a handy talky or radio device that can communicate with two or more people using radio waves. It has a frequency range of 136-174 MHz and a battery life of up to 11 hours (using a high-capacity NiMH battery). The device can be programmed for 1 to 99 channels, each with its own power, channel name and channel spacing. The device also has a keypad that can be used to program all functions of the radio as well as functioning as a DTMF encoder. The device can also be programmed with a computer using appropriate software and interface cable.


Download: https://miimms.com/2w4nEA


In this article, we will show you how to download the software for the Motorola GP 2000 VHF and how to use it to program your device. Before you start, you will need the following items:


  • A Motorola GP 2000 VHF device



  • A USB programming cable compatible with the device



  • A computer with Windows operating system



  • An internet connection



Step 1: Download the software




The software for the Motorola GP 2000 VHF is called CPS (Customer Programming Software). You can download it from the official Motorola website or from other sources online. The file name is CPS_R03_00_01_EN.zip and the file size is about 6 MB. To download the software, follow these steps:


  • Go to the website where you want to download the software.



  • Click on the download link or button.



  • Save the file to your computer.



  • Extract the file using a zip extractor program.



  • Open the folder where you extracted the file and double-click on the setup.exe file.



  • Follow the instructions on the screen to install the software.



Step 2: Connect the device to the computer




After you have installed the software, you need to connect your Motorola GP 2000 VHF device to your computer using the USB programming cable. To do this, follow these steps:


  • Turn off your device and remove the battery.



  • Plug one end of the USB programming cable into the USB port of your computer.



  • Plug the other end of the USB programming cable into the accessory connector of your device. The accessory connector is located at the bottom of your device, next to the antenna connector.



  • Reinsert the battery and turn on your device.



  • Wait for your computer to recognize your device and install the drivers if needed.



Step 3: Program your device




Now that you have connected your device to your computer, you can use the CPS software to program your device. To do this, follow these steps:


  • Open the CPS software by clicking on its icon on your desktop or in your start menu.



  • Select "Read Device" from the "Device" menu or click on the "Read Device" button on the toolbar. This will read the current settings of your device and display them on the screen.



  • Edit the settings of your device according to your preferences. You can change various parameters such as frequency, power, channel name, channel spacing, tone and carrier squelch, scan lists, etc. You can also add or delete channels as needed.



  • Select "Write Device" from the "Device" menu or click on the "Write Device" button on the toolbar. This will write your new settings to your device and confirm them on the screen.



  • Select "Exit" from the "File" menu or click on the "Exit" button on the toolbar. This will close the CPS software.



  • Disconnect your device from your computer and unplug the USB programming cable.



Congratulations! You have successfully downloaded and used the software for your Motorola GP 2000 VHF device. You can now enjoy using your device with your customized settings.


I hope this article was helpful for you. If you have any questions or feedback, please leave a comment below. Thank you for reading!


About

Welcome to Deep Earth Books Community! Please use this space...

Members

Group Page: Groups_SingleGroup
bottom of page